Monday, December 31, 2012

Epoxy Putty

        Hi guys, sorry for the third wordy post in a row. You are probably wondering what happened to my nitemav. I have had all of the parts completely ready for the nitemav for about a month now. The only reason why it isn't finished yet is because I dont have epoxy putty. I went to Lowes expecting to buy some epoxy putty but they didn't have any. That made me disappointed because I thought that I would finally have a nitemav. It will be finished the day I get some epoxy putty though.
        Well, you probably stopped reading this post by now. If you haven't, thank you. If I get some epoxy putty I will also be making some sort of snap. This snap will probably be a snap pistol or snap bow. I have all of the parts for either of these except the putty (the ramp). Well, I guess that is it for the worlds most boring post. I should be getting some kind of mods up soon.
       

Sunday, December 30, 2012

1000 views!

Wow this is a big deal for us. We hit 1000 views yesterday on the blog and that is awesome. Thank you for going on our blog. 1000 views is a lot for us.

My Update: December 29, 2012

Hey Guys I just wanted to tell you that I have been working on a project that will be released when I finish painting it. The weather right now is not good for painting so I will wait till it gets a little warmer. I don't want to give to much away but the paint job will be Black and Gold with White accents. Another project I had in mind was maybe converting a Bow and Mallow marshmallow bow into a nerf gun. Give me your feedback on the bow I want to see if i should try it or not. Happy New Year everyone I will be looking to make some posts in my freetime in 2013.

Saturday, December 29, 2012

Aabow

I just made my aabow and it is really awesome. It isn't quite finished though because I still need it to be painted. I ended up switching it from a CPVC tee at the end to a PVC tee that I screwed in. Other than that, the picture are the same.
These are just some different views of it.
It is shooting really well now. I can't test the ranges yet because there is snow outside. I can only use slugs in an rscb for now because they get suction loaded in the plunger tube. I will fix that later but I am very happy with this bow. 


Wednesday, December 26, 2012

Very Simple Stryfe Mod

This is a very simple mod for your Nerf Stryfe. It is so you don't have to wait 1 second between each dart before you fire.
Take your Stryfe and place it down with the screw ports up of course. 
After removing the screws, take it apart and the internals should look like this. You are going to want to remove the piece that iss circled in the picture above.
The piece looks like this.
Once you remove the piece, The internals should look like this. With this mod your Stryfe will now jam less and it will have a better rate of fire. 

Sunday, December 23, 2012

[UPDATE] Almost Finished Max D 2000



Hi guys, this is definitely my favorite mod yet. As you know, I modified my Super Soaker to shoot
Nerf darts. I replaced the pump with a ball pump so It takes a lot less pumps. I replaced the original pump handle with CPVC and I had to alter the shell a bit because of that. I am mainly using CPVC barrels now instead of PVC.
I used Duct Tape on it so I can still take it apart if I want to.
Here is a front view.
Here it is with a speed loader. I also tried it with an RSCB clip and it works very well. With this speedloader I got 130 feet flat with a streamline. This is no lie. Eight pumps got 130'! I am very happy about this mod and it was definitely the most difficult one I have done. I hope you like it. Unfortunately, I was not able to replicate those ranges with a streamline again. I could hit that range almost every time with an elite dart though. I used a longer barrel and it works much better too.  

Thursday, December 20, 2012

Max D 2000 Nerf Conversion

I just got around to doing some quick modding and I decided to convert my Max D 2000 into a Nerf gun. It was a pretty easy mod and I just attached some pvc to it. I don't have the ranges yet but i'm guessing that with 20 pumps it gets about 50 feet, 30 pumps 75 feet, and 50 pumps 100+ feet. It takes that many pumps because the pump is about the size of the secret strike pump. That isn't good. I will upgrade the pump or make a homemade pump later. If you have any pump super soaker you should definitely do this. (Note: The barrel is slightly angled but not as much as it looks.)

Tuesday, December 11, 2012

Update

This is just an update for the coming month or two. I wont be able to do as many mods or make many posts coming up because I have a lot of papers and projects due before winter break. Also, my nitemav is almost finished but I wont be getting epoxy putty until after Christmas. I might post an update picture on it but I don't want to finish it until I get the putty. Hot glue just doesn't work well when it comes to stuff like that. I am also running very low on supplies and I wont be getting any more until after Christmas. After my break is over I will go back to school and will have one week before finals and midterms. I will have about a one week window where I will probably have a lot of posts, but other than that this blog might be pretty slow for a while. I am very sorry for all of the boring posts recently but I have nothing else to post.

Xploders

Hi, I was just watching TV and I saw a commercial for Xploders. I am not a fan of Xploders for many reasons. In this commercial Xploders blasters are being compared to Nerf blasters. You can see the video here. I really don't think that Xploders should be compared with Nerf because Xploders are horrible:
-No triggers
-It takes a long time to prepare the ammunition
-No reusable ammunition
-Frequently jams
-Not accurate
-Many, many other things.
What are your opinions on this commercial?

Monday, December 10, 2012

Nerf News

Hi guy, quick one here. Nerf just announced the rough cut and diatron on their Facebook page. I think that Nerf should start trying to announce their blasters before releasing them.

Sunday, December 9, 2012

Nitemav Update

Hi guys, I guess what I said was "Dracs" way of making a Nitemav is the best way. It is too hard to get the catch to work in only the maverick shell. I'm going to try to get it to work a little bit longer but if not I will be putting some of the Nitefinder shell on it. The only problem with this is that the Nitefinder shell is painted black. It will look really weird but it should work. I will probably give the Nitemav to Aukman to paint after it is finished. Well, that is it and it should be finished by Wednesday.

Thursday, December 6, 2012

My Magstrike

Hi, I had my magstrike opened up and it was just on the floor so I decided to mod it before I make my nitemav. It can shoot 2 full magstrike clips as you can see in the video below. It takes 40 pumps and doesn't let any more air go in after 40. Enjoy!

Wednesday, December 5, 2012

Nitemav on the way!

Hi guys, I just wanted to make a post about how i'm going to make a nitemav. I decided this because I have 4 mavericks and the screw ports broke off on one of my nitefinders. I admit that when I first got into modding I watched Drac. He was the main person I found. Later, I found much better modders and I als found NerfHaven. My point is that no one should ever try Drac's nitemav. It is really hard and there are much easier ways to do it without cutting your maverick. I know that you shouldn't do it because Aukman tried it once. Well that's it.

Friday, November 30, 2012

My Recon

This is my Recon. It is pump action and it has a power stock with a LSFG spring. It isn't a powerful spring but it is good enough. On the inside it has my cpvc breech that accepts clips and the spring compresses more. I also removed all of the locks. I haven't tested the ranges ret but I expect them to be 40-50'. I really like this gun even though it isn't the most powerful.

Sunday, November 25, 2012

AWESOME SHARP SHOT MOD + PAINTJOB


I am sorry for the lack of posts. Thanksgiving break was chaotic and I didn't get around to anything. Drev helped me with the Cpvc mod part again but I did the paintjob and came up with the idea. I think this is the first of it's kind by being an internally cpvc'ed Sharp Shot. The paint job is Hunter Green and Metallic Gold. It is very evenly applied and looks factory. 





Thanks Again!

Thank you so much! Our blog just surpassed 500 page views. I know that it isn't much but I am very happy about it.

Friday, November 23, 2012

My HAMP

This is my HAMP. It is a really awesome type of homemade blaster that doesn't even require a spring.
I added some dart holders to it to make things more convenient. I'm using a 1/2" PVC barrel for it. CPVC didn't work because it was too tight of a fit. PVC works just fine with taggers, sonic micros, and streamlines. Taggers and micros work the best though.

I added a stop made of dowel rod to it so that I don't knock the back off of the whole blaster. The key ring can go on the rod to stop the plunger from falling forward which I really like. I might get around to making an RSCB for it but i'm not sure if I will. I made this blaster purely for fun and I don't plan on using it in any mini wars that I have. I really like how it turned out.

Wednesday, November 21, 2012

Awesome Big Bad BOw

Hi guys, I just finished my Avengers BBB.
I got the Avengers version because I like the purple color better than yellow. I can always sand off the Avengers logo. I added a stampede spring to it so it is more powerful. I found that a stampede spring is better in the BBB than a nf spring. This is because the stampede spring is longer. I changed the barrel to cpvc and removed the dead space with hot glue. I didn't glue any specific couplers to it and it works fine for me. It has an almost perfect seal too. I made an RSCB clip for it and it can hold 4 streamlines or  
8 of my stefans (which are about half the size of streamlines). I plan on testing the ranges very soon. It is really awesome.

Monday, November 19, 2012

Update

Hi guys! Sorry that there haven't been posts for a couple days. I have been really busy lately. I will be posting a BBB mod once I get the BBB and I will be posting an awesome cpvc breech design that iMod helped me with (if I do it right). Aukman should also have some awesome paintjobs coming up too.  

Wednesday, November 14, 2012

Nerf Recon Sale!

I was browsing for black Friday Nerf Gun deals and I found that there are $10 Recons at Walmart. You could buy two of these things for the price of one! This is also a cool opportunity to single a Recon. 


Monday, November 12, 2012

Strike Fire Minimization

Here is a pretty really cool minimization. This mod is on a Dart Tag pistol that I minimized. I also did a penny mod to the internals and removed the air restrictors. Later I will spray-paint it silver with a black priming mechanism.

Gun before minimization. (Orange Version)

Gun after minimization. (Green Version)

Sunday, November 11, 2012

Updated: My cpvced nitefinder

w/o speedloader

w/ speedloader
I told you guys that I would be making an update to my nitefinder Drev helped me coupler it and actually convinced me to do it because un cpvced it hit at least 60. I didnt get around to painting it but that is next. Sorry about the flame duct tape. It is Drevs. I thought I had gold but it was all gone.

Saturday, November 10, 2012

Drev's Inline Clip Tutorial

Here is a tutorial for my version of an inline clip. I came up with this design yesterday and it works pretty well. It holds three streamlines. It is slightly inconsistent with them, but it will eventually fire all three. These steps are in the captions of the photo.
You need 5.5" of PVC, 2.5" of CPVC, a CPVC to PVC adapter, and some electrical tape.
Bevel out one side of the CPVC with a dremel or scrape it out with scissors and sand the side too.
Hammer the CPVC into the PVC and then put hot glue in between them.
Place some CPVC into the adapter. I already did it in the first picture.
E-tape these parts of the clip.
Put it together like this. Look at my previous article to see how to use it.
Here is the link: http://flynerf.blogspot.com/2012/11/nitefinder-inline-clip.html

Thank You

Thank you so much everybody. We started this blog just this week and we already surpassed 200 views. I am with Aukman right now and he told me to post this. In honor of 200 page views, I will post  a tutorial for my NiteFinder inline clip. It fires streamlines so it is nice for people without stefans. Thanks so much.

Friday, November 9, 2012

Nitefinder Minimization

Another Paintjob/mod was this nitefinder minimization that has a simple gold paintjob but a sweet minimization. In the recent future i will probably cpvc it and give it a green & gold paint job

Recon Paint Job

One of my paint jobs is a simple modded recon with a gold and white paint job on it. The paint job was meant to mimic a gear up gun with cooler colors.

Hi I am......

Hi I am Aukman and I am an author on this page. I will have posts coming about mods and paintjobs. Drev is better with the mods I am better with the paint jobs so expect some to come. p.s. I made the banner @ the top.

NiteFinder Inline Clip

Today I made this inline clip for my NiteFinder. This is what it looks like.

















The cpvc to pvc adapter comes off like this.
One dart sticks out of the end when loaded.
Firing the darts is inconsistant sometimes. Sometimes they fire really well and sometimes they get stuck in the barrel. It is usually the second dart that does that. I might change this to hold two darts or three shortened darts so that it becomes more consistant. Other than that, I am happy with it.





Wednesday, November 7, 2012

Ok, I lied I do have another post today. I found a spring website that I plan on using. I'm not sure if it is trustworthy but it probably is. It lets you customize your own spring to any dimensions and material. It would be really nice for the new Elite guns or any gun for that matter. http://www.springsfast.com/  It looks like a pretty cool site.

Update

Hi guys, I just finished redoing my Nite Finder. I redid the seal and tried a new way to lessen the dead space. It worked really well. I didn't test the ranges yet because it is too dark outside. I will get the ranges as soon as I can. I am also working on cpvc breech with a deodorant clip. I really want it to be a good one. Well, that is it for today unless Aukman finally makes a post.

Tuesday, November 6, 2012

Night Finder Minimization

My brother, Drev, and I have found a really nice way to minimize the NiteFinder. Drev helped with the seal and the air restrictors, but this is about the minimization. Now with this mod you can really get the pistol/handgun feel to it because it's lighter, smaller, and more visually appealing. If you have a hacksaw at home, go ahead do this mod. Just don't hurt yourself.

Maverick Singled Barrels

Sorry that we have very basic mods on here so far. Here is a very cool one though. This is a maverick with singled barrels. I used epoxy and hot glue. It looks pretty cool without the effort of cpvc.
We will be posting tutorials and reviews soon.

Longshot Front Barrel

This is a cool idea for a Longshot barrel. I don't know why but we used hot glue instead of epoxy. I will be using epoxy later.

Secret Strike AS-1 Cpvc Mod

This is a mod that Aukman did to my Secret Strike. It is way better than when it was stock. It fires all darts pretty well, but Elites fire the best. It gets ranges of up to 35 feet with Elites. It is a great mod and all credit goes to Aukman on this one. It is awesome.

First Recon cpvc breech that I have seen

This is my recon cpvc breech. I didn't have to do much cutting with the cpvc. I just made the opening of the cpvc a bit bigger. It accepts clips and streamlines. I just had extra Recon parts so I interchange them. It is a nice mod and the first of it's kind that I have seen.

Basic Coupler Mod: Showing

This is a basic cpvc coupler mod that I did to my clear NiteFinder. I think it looks pretty good. It is a very common and basic mod, but mine has a great seal. I gets about 50 ft. will sonic micros and about 90-100 with Elites. Note, there is a 6 kg spring from Orange Mod Works in there.
This is the easiest and best design for a NiteFinder speedloader out there.

Hello

Hi, sorry if the website doesn't look at it's best yet. We are going to make it look really nice. In case you don't know, we will post reviews, mod tutorials etc. about Nerf. We are very excited about this blog and we are fairly new to the Nerf community. We will start posting soon.